Horizontal axial-suction, single-stage, single-suction, single-casing pump. The impeller is offered in open, semi-open, closed and free-flow form, so the same casing covers clean-ish water transfer, fibrous sewage and solids-bearing process water — the free-flow version passes large solids without a chopper. Used on sewage treatment projects, breweries, power plants, petrochemical plants, mines, paper mills and construction sites. Outlet DN40–DN500, flow 10–3,000 m³/h, head 5–80 m, two speed families (1450 and 960 r/min) so a lower-speed build can be selected where wear life matters more than head. Wetted parts are wear-resistant metal only in this series.
General Specifications
Outlet SizeDN40 – DN500
Flow Rate10 – 3,000 m³/h
Head5 – 80 m
StructureHorizontal, axial suction, single stage, single suction, single casing
Impeller StylesOpen, semi-open, closed, free flow — selected per medium
Speed Families1450 r/min and 960 r/min
Model DesignationOutlet DN + impeller diameter in mm, e.g. 100-315 or 200-400
Model Range50-160 · 65-200 · 80-315 · 100-315 · 125-315 · 150-400 · 200-400 · 250-400 · 300-500 · 400-500 · 400-710 · 500-630
SelectionSeries ranges are for preliminary selection; the final model is selected against the duty point and the printed curve.
Max. Working Temperature≤ 40 °C
Materials & Coating
Wetted PartsWear-resistant metal (high-chrome alloy)
CasingSingle casing
ImpellerOpen / semi-open / closed / free flow, matched to the solids in the medium
Shaft SealGland packing; mechanical seal on request
Applications
Sewage treatment plants Breweries and food plants Power station and FGD slurry water Mining and paper mill process water
Four impeller styles in one casing
The casing stays the same and the impeller changes: open, semi-open, closed or free flow. Open and semi-open pass fibrous and solids-bearing water; closed is the efficient choice for cleaner water; free flow passes large solids without a chopper.
That is the first decision on this series. Choosing a closed impeller for a rag-laden duty is the usual reason a sewage pump blocks, and choosing free flow for clean water gives away efficiency for nothing.
Two speed families, two wear lives
The series is published at 1450 and 960 r/min. The slower build gives lower wear and lower NPSH requirement at the same duty point, at the cost of a larger machine — which is the trade to make where maintenance access is difficult.
Outlet DN40–DN500, flow 10–3,000 m³/h, head 5–80 m. Wetted parts are wear-resistant metal in this series.
More from this series
Related guides
